List of products by brand NEO COOLCAM

NEO Coolcam Brand Z wave Sensors,wifi Sensors,IP Cameras

  • Coolcam Smart Water...

    $18.99
    1. FUNCTION – Our smart wireless water sensor offers reliable performance, helping to keep your home safe, by alerting you to potential water leak before the issue becomes too serious, thus helping to prevent costly water damage. Battery powered with low energy consumption, it can operate in standby mode for over 6 months. The sensor, requires little effort to install and it is very easy to use, you are certain to get the quality and durability that you desire.
    2.smallest of gaps. For a total peace of mind, place the water sensor near your washing machine, water heater, skins or dishwasher. The bottom of the sensor contains 3 highly sensitive gold-plated probes, which when it comes in contacts with water will create a circuit, that will set off the alarm to alert you of possible flood.
    3. PLUG & PLAY WITH INTUITIVE APP – Our Smart Water Sensor requires no hub or subscription service. Designed to connect to your existing Wi-Fi network, simply download the Wstein App on iOS and Android, and link it to the water sensor. From the app you will receive instant push notification of water leakage and it also possible to keep an eye on the battery level of the device, to ensure the water sensor will never run out of power.
    4. PACKAGE INCLUDES: 1x Smart Water Sensor, 1x Base Cover, 1x CR2 Battery, 1x Screws and Anchor and User Manual. 
  • NEO COOLCAM NAS-AB01Z...

    $28.00

    Siren alarm is an intelligent device that can be controlled remotely by the radio frequeny.siren alarm send messages via z wave network to the z wave main controller.in teh z wave network communications.siren alarm can be connected to any z wave main controller.different coutries or areas.the radio frequency of the z wave network is different.In the communication between the siren alarm and teh z wave main controller.the siren alarm can both send and receive messages.when press teh code button of siren alarm,it will send message to the zwave main controller.the z wave main controller can display the on/off status of the siren alarm.thwne the siren alarms receives messages from the z wave mainl controller,the siren alarm will be triggered.the siren alarm is battery powered ,small and easily install.when the siren alarm is working.led light will flash aand there will be alarm sound at the same time.the sound is not lower than 90 db.

  • NEO COOLCAM NAS-DS01Z...

    $16.50

    Protect your home entrances through your Z-Wave Smart Hub (required). Works with exterior or interior doors, garage doors, patio doors, windows, cabinets, safes, closet doors, baby gates, as well as other doors or windows.

  • NEO COOLCAM NAS-PD01Z...

    $22.00

    Motion Sensor PIR is a passive infrared detector or physical sensor.This sensor doesn't emit any energy but only

    passively receive and detect infrared radiation from outside.Under room temperature,all items have radiation.Human

    beings are warm-blooded animals with stable infrared radiation.so ware most easily to be detected.That is why we also 

    call it body sensor.PIR send messages via z wave network to z wave gateway.In the z wave network communitcations.

    Pir can be connected to any z wave gateway.Different countries or areas,the radio frequency is different.in the 

    commnutication betweek pir and z wave gateway.PIR can only send messages.not be able to receive messages.When pir is 

    triggered.pir will send message to z wave gateway.and associate devices to work throught z wave gateway.PIR is battery 

    powered,is small and can be installed easily

  • NEO COOLCAM NAS-PD02Z...

    $29.99

    Motion Sensor PIR is a passive infrared detector or physical sensor.This sensor doesn't emit any energy but only

    passively receive and detect infrared radiation from outside.Under room temperature,all items have radiation.Human

    beings are warm-blooded animals with stable infrared radiation.so ware most easily to be detected.That is why we also 

    call it body sensor.PIR send messages via z wave network to z wave gateway.In the z wave network communitcations.

    Pir can be connected to any z wave gateway.Different countries or areas,the radio frequency is different.in the 

    commnutication betweek pir and z wave gateway.PIR can only send messages.not be able to receive messages.When pir is 

    triggered.pir will send message to z wave gateway.and associate devices to work throught z wave gateway.PIR is battery 

    powered,is small and can be installed easily

  • NEO COOLCAM NAS-SC01Z...

    $22.00

    Light switch is an intelligent device that can be remotely controlled throught z wave network communitcations,light switch can be connected to any z wave gateway.when using radio waves,light switch can be used in z wave gateway.The frequency of radio waves used by gateway and switch is like this:different countries or areas,the radio frequeny is different.Each light switch has a unique ID code.When we add or remove the switch from the alarm host.just place light switch in the z wave network range of gateway.Then we can easily find the switch throught the device ID code.In commnunication with gateway.light switch not only can send signals to z wave gateway.but also can receive signals from it.When touch the button on light switch.it would send signals to z wave gateway.then gateway can correctly display the switch on/off state.then light switch receives signals from gateway.the switch state would be remotely switched on/off

  • NEO COOLCAM NAS-WR01ZE...

    $21.00

    This Power Plug from Neo CoolCam can be placed between the plug of eg your lamp and your socket. This gives you the possibility to control it remotely via your home automation controller. It also measures energy consumption (current and total), voltage (V) and amount of power (A). Ideal to also monitor your consumption well.This between plug is 43 x 43 x 65mm and a maximum of 13A can be connected. He can work together with Z-Wave and Z-Wave plus controllers.

  • NEO COOLCAM NAS-WS01Z...

    $28.00
    This is the Z-wave Wifi Flood Sensor,Compatible with z-wave 300 series and  500 series.
    The water sensors is an intelligent security equipment that can tranmit the Z-wave network which have particular frequency,different countries or areas.the radio frequency of Z-wave main controller.in the Z-wave network communications.water sensor can send messages to the Z-wave main controller.the realize association with other devices through the Z wave network.In the communication with the Z-wave main controller.the water sensor can send messages to the Z-wave main controller.but it can not receive messages from the Z-wave main controller.When the water sensor is triggered.the LED light keeps and the the buzzer will make sound.the water sensor sends messages to the Z-wave main conttroller at the same time.the z-wave main controller will display the current status of water sensors.Water sensors is battery powered.is small and can be installed easily
  • NEO COOLCAM Wifi Smart...

    $10.50
    Product Discription:
     
    Voice Control: Control your home appliances with the smart plug by simply giving voice commands to Amazon Alexa or Google Assistant. Be the conductor of your home devices.
    APP Control: With the Tuyasmart Apps on your smartphone, control your home appliances remotely when the plug is connected to 2.4G Wi-Fi.
    Schedule Your Home: Set a schedule for your home appliances any time of a day. You can create a group for all of your smart devices and control them all with just one command.
    All-sided Compatibility: As the entry point of home automation, this smart plug provides a wide range of controllability for most home electronics and leads you to a smarter lifestyle.
    Sleek and Small: The enhanced plastic housing brings better compactness and longer service life. The simple but elegant design blends perfectly into every corner of your home.
  • NEO COOLCAM Z-wave...

    $28.00

    Light switch is an intelligent device that can be remotely controlled throught z wave network communitcations,light switch can be connected to any z wave gateway.when using radio waves,light switch can be used in z wave gateway.The frequency of radio waves used by gateway and switch is like this:different countries or areas,the radio frequeny is different.Each light switch has a unique ID code.When we add or remove the switch from the alarm host.just place light switch in the z wave network range of gateway.Then we can easily find the switch throught the device ID code.In commnunication with gateway.light switch not only can send signals to z wave gateway.but also can receive signals from it.When touch the button on light switch.it would send signals to z wave gateway.then gateway can correctly display the switch on/off state.then light switch receives signals from gateway.the switch state would be remotely switched on/off